Bed Will Not Raise
Bed Will Not Raise
The bed will not raise up and only goes down.
- The first step is to turn the machine off and turn it on again.
To raise the bed, press the Z/U button, then the LEFT arrow key.
- If the bed will still not raise, ensure the red light on the sensor of the laser head is red:
Red light on the sensor of laser head
If the red light is not lit, ensure the autofocus pin is not bent and can smoothly move up and down.
If the brass autofocus pin is bent or does not easily go up and down, please see the following guide on replacing the brass pin:
Related Articles
Troubleshooting
Troubleshooting 14 Docs Squaring the Laser Head MIRA Last Updated: 7th April, 2023 Overview What you will learn In this guide, you will learn how to square the laser head on your MIRA. When to do this You should check and see if your laser he... ...Multi Roller User Guide
Multi Roller User Guide Updated on Apr 08, 2026 What You Need ? STOP If you have not set up the Multi-Roller yet, please follow the setup instructions for your machine model before continuing: MIRA5 | MIRA7 | MIRA9 Need assistance? Book time with a ...Install a 4" Lens NOVA
Install a 4" Lens NOVA Updated on Mar 21, 2025 Overview What you will learn In this guide, you will learn how to safely install the 4” lens on your NOVA and ensure it functions properly. When to do this The 4” lens should be installed when you are ...Squaring the Laser Head MIRA
Squaring the Laser Head MIRA Updated on May 17, 2024 Overview What you will learn In this guide, you will learn how to square the laser head on your MIRA. When to do this You should check and see if your laser head is square if you recently ...Understanding Materials and Settings for a CO2 Laser
Understanding Materials and Settings for a CO2 Laser Updated on Apr 08, 2026 Overview What you will learn In this guide, you will learn the basics of being able to find the settings to use with your CO2 laser. When to do this The aim of this document ...