In this guide, you will learn how to install and configure the basic settings for use of both a chuck style rotary and a roller style rotary with your EMP fiber laser.
Rotaries are designed to be used when trying to engrave cylindrical or rounded objects. The chuck mechanism grips the object securely at one end, similar to how a lathe works, allowing the laser to engrave around the entire surface as the object rotates. A roller mechanism allows the item to sit atop it, using friction to spin the item while it engraves. Items such as cups, glasses, bottles, or other similar objects can all be engraved on a rotary.
Book time with a qualified technician and learn how to install and optimize your rotary attachment.
🔔 For the best full screen experience, open the guide in a new browser window.
Alternatively, view the full document embedded below.
We are committed to making your experience with AEON Laser USA as seamless as possible. If you have any questions or concerns, please send us an email at support@aeonlaser.us for the fastest service. If your laser is malfunctioning, please submit a support ticket.
Did you find this document helpful? Let us know what you liked or what we can improve on by sending an email to helpusgrow@aeonlaser.us.
Happy Lasering!
DISCLAIMER: AEON LASER USA AND ENGRAVING MACHINES PLUS, CORP ARE NOT RESPONSIBLE FOR ANY DAMAGES OR INJURIES THAT MAY RESULT FROM FOLLOWING THESE SUGGESTIONS. USE CAUTION AT ALL TIMES.