Laser 101

Laser 101

    • Related Articles

    • Laser Delivery

      Updated on May 22, 2023 Inspecting the Crate Upon arrival, while the delivery driver is still present, inspect all four sides along with the lid of the crate for any visible damage. Note: Pay particular attention to any rectangular shaped puncture ...

    • Winterizing Your Laser

      Winterizing Your Laser Updated on Jan 16, 2024 Overview As winter approaches, it's important to consider how the cold temperatures can affect your laser, particularly CO2 laser tubes. While lasers can operate in a wide range of temperatures, they are ...

    • Squaring the Laser Head MIRA

      Squaring the Laser Head MIRA Updated on May 17, 2024 Overview What you will learn In this guide, you will learn how to square the laser head on your MIRA. When to do this You should check and see if your laser head is square if you recently ...

    • CO2 Laser Tubes: RF or Glass?

      CO2 Laser Tubes: RF or Glass? Updated on May 24, 2024 Overview What you will learn In this guide, you will learn about the key differences between Radio Frequency (RF) CO2 laser tubes and their traditional Direct Current (DC) Glass counterparts. ...

    • Why Is My CO2 Laser Not Cutting?

      Why Is My CO2 Laser Not Cutting? Updated on Mar 18, 2024 Overview What you will learn In this guide, you will learn how to diagnose why your laser will not cut through your material. When to do this You would check the following points if you ...