In this guide, you will learn about the different air assist options available on your AEON laser engraving machine, how they affect engraving and cutting performance, and how to control them effectively. We will cover the functions of the built-in air assist system, the differences between low and high air settings, and how external compressors can enhance your results. By the end, you'll have a clear understanding of how to optimize air flow for various materials and applications.
Adjusting air assist settings is important when switching between engraving and cutting, as well as when working with different materials. Using the correct air pressure can improve engraving detail, reduce charring, and enhance cutting efficiency. You should also check and configure your air settings when troubleshooting inconsistent cuts, excessive smoke buildup, or unwanted material discoloration. If you are upgrading to an external compressor, proper setup and calibration will ensure optimal performance.
🔔 For the best full screen experience, open the guide in a new browser window.
Alternatively, view the full document embedded below.
We are committed to making your experience with AEON Laser USA as seamless as possible. If you have any questions or concerns, please send us an email at support@aeonlaser.us for the fastest service. If your laser is malfunctioning, please submit a support ticket.
Did you find this document helpful? Let us know what you liked or what we can improve on by sending an email to helpusgrow@aeonlaser.us.
Happy Lasering!
DISCLAIMER: AEON LASER USA AND ENGRAVING MACHINES PLUS, CORP ARE NOT RESPONSIBLE FOR ANY DAMAGES OR INJURIES THAT MAY RESULT FROM FOLLOWING THESE SUGGESTIONS. USE CAUTION AT ALL TIMES.