Popular Articles
Getting Started
Getting Started 16 Docs Prepare Your Workspace Last Updated: 5th May, 2023 Electrical Ensure the circuit you plan to connect to is properly wired and grounded. Your Aeon laser requires a 110v/60Hz standard outlet. ⚠️CAUTION ⚠️ A dedica... Laser ...
Prepare Your Workspace
Prepare Your Workspace Updated on Sep 20, 2023 Electrical Ensure the circuit you plan to connect to is properly wired and grounded. Your Aeon laser requires a 110v/60Hz standard outlet. ⚠️CAUTION ⚠️ A dedicated 20 amp circuit is recommended. However, ...
Laser Delivery
Updated on May 22, 2023 Inspecting the Crate Upon arrival, while the delivery driver is still present, inspect all four sides along with the lid of the crate for any visible damage. Note: Pay particular attention to any rectangular shaped puncture ...
Lifting, Turning or Moving your MIRA
Lifting, Turning or Moving your MIRA Updated on Dec 05, 2023 Read through these guidelines fully before attempting to move or lift the machine through tight spaces, turning the machine onto its side, lifting with a shoulder dolly, or lifting onto a ...
Unboxing and Setting Up Your NOVA
Unboxing and Setting Up Your NOVA Updated on Nov 30, 2023 Read through these guidelines fully before attempting to do unbox and setup your machine. Disclaimer: These are suggestions. AEON Laser USA is not responsible for any damage or injury that may ...